/* USER CODE BEGIN Header */
/**
  ******************************************************************************
  * File Name          : SAI.c
  * Description        : This file provides code for the configuration
  *                      of the SAI instances.
  ******************************************************************************
  * @attention
  *
  * Copyright (c) 2026 STMicroelectronics.
  * All rights reserved.
  *
  * This software is licensed under terms that can be found in the LICENSE file
  * in the root directory of this software component.
  * If no LICENSE file comes with this software, it is provided AS-IS.
  *
  ******************************************************************************
  */
/* USER CODE END Header */

/* Includes ------------------------------------------------------------------*/
#include "sai.h"

/* USER CODE BEGIN 0 */

/* USER CODE END 0 */

SAI_HandleTypeDef hsai_BlockA1;
SAI_HandleTypeDef hsai_BlockB1;
DMA_HandleTypeDef hdma_sai1_b;
DMA_HandleTypeDef hdma_sai1_a;

/* SAI1 init function */
void MX_SAI1_Init(void)
{

  /* USER CODE BEGIN SAI1_Init 0 */

  /* USER CODE END SAI1_Init 0 */

  /* USER CODE BEGIN SAI1_Init 1 */

  /* USER CODE END SAI1_Init 1 */

  /* USER CODE BEGIN SAI1_Init 1 */

  /* USER CODE END SAI1_Init 1 */

  hsai_BlockA1.Instance = SAI1_Block_A;
  hsai_BlockA1.Init.AudioMode = SAI_MODEMASTER_TX;
  hsai_BlockA1.Init.Synchro = SAI_ASYNCHRONOUS;
  hsai_BlockA1.Init.OutputDrive = SAI_OUTPUTDRIVE_DISABLE;
  hsai_BlockA1.Init.NoDivider = SAI_MCK_OVERSAMPLING_DISABLE;
  hsai_BlockA1.Init.MckOverSampling = SAI_MCK_OVERSAMPLING_DISABLE;
  hsai_BlockA1.Init.FIFOThreshold = SAI_FIFOTHRESHOLD_EMPTY;
  hsai_BlockA1.Init.AudioFrequency = SAI_AUDIO_FREQUENCY_48K;
  hsai_BlockA1.Init.SynchroExt = SAI_SYNCEXT_DISABLE;
  hsai_BlockA1.Init.MonoStereoMode = SAI_STEREOMODE;
  hsai_BlockA1.Init.CompandingMode = SAI_NOCOMPANDING;
  hsai_BlockA1.Init.TriState = SAI_OUTPUT_NOTRELEASED;
  if (HAL_SAI_InitProtocol(&hsai_BlockA1, SAI_I2S_STANDARD, SAI_PROTOCOL_DATASIZE_24BIT, 2) != HAL_OK)
  {
    Error_Handler();
  }
  hsai_BlockB1.Instance = SAI1_Block_B;
  hsai_BlockB1.Init.AudioMode = SAI_MODESLAVE_RX;
  hsai_BlockB1.Init.Synchro = SAI_SYNCHRONOUS;
  hsai_BlockB1.Init.OutputDrive = SAI_OUTPUTDRIVE_DISABLE;
  hsai_BlockB1.Init.MckOverSampling = SAI_MCK_OVERSAMPLING_DISABLE;
  hsai_BlockB1.Init.FIFOThreshold = SAI_FIFOTHRESHOLD_EMPTY;
  hsai_BlockB1.Init.SynchroExt = SAI_SYNCEXT_DISABLE;
  hsai_BlockB1.Init.MonoStereoMode = SAI_STEREOMODE;
  hsai_BlockB1.Init.CompandingMode = SAI_NOCOMPANDING;
  hsai_BlockB1.Init.TriState = SAI_OUTPUT_NOTRELEASED;
  if (HAL_SAI_InitProtocol(&hsai_BlockB1, SAI_I2S_STANDARD, SAI_PROTOCOL_DATASIZE_24BIT, 2) != HAL_OK)
  {
    Error_Handler();
  }
  /* USER CODE BEGIN SAI1_Init 2 */

  /* USER CODE END SAI1_Init 2 */

}
static uint32_t SAI1_client =0;

void HAL_SAI_MspInit(SAI_HandleTypeDef* saiHandle)
{

  GPIO_InitTypeDef GPIO_InitStruct;
/* SAI1 */
    if(saiHandle->Instance==SAI1_Block_A)
    {
    /* SAI1 clock enable */
    if (SAI1_client == 0)
    {
       __HAL_RCC_SAI1_CLK_ENABLE();
    }
    SAI1_client ++;

    /**SAI1_A_Block_A GPIO Configuration
    PE2     ------> SAI1_MCLK_A
    PE4     ------> SAI1_FS_A
    PE5     ------> SAI1_SCK_A
    PE6     ------> SAI1_SD_A
    */
    GPIO_InitStruct.Pin = GPIO_PIN_2|GPIO_PIN_4|GPIO_PIN_5|GPIO_PIN_6;
    GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
    GPIO_InitStruct.Pull = GPIO_NOPULL;
    GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
    GPIO_InitStruct.Alternate = GPIO_AF6_SAI1;
    HAL_GPIO_Init(GPIOE, &GPIO_InitStruct);

    /* Peripheral DMA init*/

    hdma_sai1_a.Instance = DMA1_Stream1;
    hdma_sai1_a.Init.Request = DMA_REQUEST_SAI1_A;
    hdma_sai1_a.Init.Direction = DMA_MEMORY_TO_PERIPH;
    hdma_sai1_a.Init.PeriphInc = DMA_PINC_DISABLE;
    hdma_sai1_a.Init.MemInc = DMA_MINC_ENABLE;
    hdma_sai1_a.Init.PeriphDataAlignment = DMA_PDATAALIGN_WORD;
    hdma_sai1_a.Init.MemDataAlignment = DMA_MDATAALIGN_WORD;
    hdma_sai1_a.Init.Mode = DMA_CIRCULAR;
    hdma_sai1_a.Init.Priority = DMA_PRIORITY_VERY_HIGH;
    hdma_sai1_a.Init.FIFOMode = DMA_FIFOMODE_DISABLE;
    if (HAL_DMA_Init(&hdma_sai1_a) != HAL_OK)
    {
      Error_Handler();
    }

    /* Several peripheral DMA handle pointers point to the same DMA handle.
     Be aware that there is only one channel to perform all the requested DMAs. */
    __HAL_LINKDMA(saiHandle,hdmarx,hdma_sai1_a);
    __HAL_LINKDMA(saiHandle,hdmatx,hdma_sai1_a);
    }
    if(saiHandle->Instance==SAI1_Block_B)
    {
      /* SAI1 clock enable */
      if (SAI1_client == 0)
      {
       __HAL_RCC_SAI1_CLK_ENABLE();
      }
    SAI1_client ++;

    /**SAI1_B_Block_B GPIO Configuration
    PE3     ------> SAI1_SD_B
    */
    GPIO_InitStruct.Pin = GPIO_PIN_3;
    GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
    GPIO_InitStruct.Pull = GPIO_NOPULL;
    GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
    GPIO_InitStruct.Alternate = GPIO_AF6_SAI1;
    HAL_GPIO_Init(GPIOE, &GPIO_InitStruct);

    /* Peripheral DMA init*/

    hdma_sai1_b.Instance = DMA1_Stream0;
    hdma_sai1_b.Init.Request = DMA_REQUEST_SAI1_B;
    hdma_sai1_b.Init.Direction = DMA_PERIPH_TO_MEMORY;
    hdma_sai1_b.Init.PeriphInc = DMA_PINC_DISABLE;
    hdma_sai1_b.Init.MemInc = DMA_MINC_ENABLE;
    hdma_sai1_b.Init.PeriphDataAlignment = DMA_PDATAALIGN_WORD;
    hdma_sai1_b.Init.MemDataAlignment = DMA_MDATAALIGN_WORD;
    hdma_sai1_b.Init.Mode = DMA_CIRCULAR;
    hdma_sai1_b.Init.Priority = DMA_PRIORITY_VERY_HIGH;
    hdma_sai1_b.Init.FIFOMode = DMA_FIFOMODE_DISABLE;
    if (HAL_DMA_Init(&hdma_sai1_b) != HAL_OK)
    {
      Error_Handler();
    }

    /* Several peripheral DMA handle pointers point to the same DMA handle.
     Be aware that there is only one channel to perform all the requested DMAs. */
    __HAL_LINKDMA(saiHandle,hdmarx,hdma_sai1_b);
    __HAL_LINKDMA(saiHandle,hdmatx,hdma_sai1_b);
    }
}

void HAL_SAI_MspDeInit(SAI_HandleTypeDef* saiHandle)
{

/* SAI1 */
    if(saiHandle->Instance==SAI1_Block_A)
    {
    SAI1_client --;
    if (SAI1_client == 0)
      {
      /* Peripheral clock disable */
       __HAL_RCC_SAI1_CLK_DISABLE();
      }

    /**SAI1_A_Block_A GPIO Configuration
    PE2     ------> SAI1_MCLK_A
    PE4     ------> SAI1_FS_A
    PE5     ------> SAI1_SCK_A
    PE6     ------> SAI1_SD_A
    */
    HAL_GPIO_DeInit(GPIOE, GPIO_PIN_2|GPIO_PIN_4|GPIO_PIN_5|GPIO_PIN_6);

    HAL_DMA_DeInit(saiHandle->hdmarx);
    HAL_DMA_DeInit(saiHandle->hdmatx);
    }
    if(saiHandle->Instance==SAI1_Block_B)
    {
    SAI1_client --;
      if (SAI1_client == 0)
      {
      /* Peripheral clock disable */
      __HAL_RCC_SAI1_CLK_DISABLE();
      }

    /**SAI1_B_Block_B GPIO Configuration
    PE3     ------> SAI1_SD_B
    */
    HAL_GPIO_DeInit(GPIOE, GPIO_PIN_3);

    HAL_DMA_DeInit(saiHandle->hdmarx);
    HAL_DMA_DeInit(saiHandle->hdmatx);
    }
}

/**
  * @}
  */

/**
  * @}
  */