1 files changed, 126 insertions, 0 deletions
diff --git a/Core/Src/cs4272.c b/Core/Src/cs4272.c
new file mode 100755
index 0000000..e7b639e
--- /dev/null
+++ b/Core/Src/cs4272.c
@@ -0,0 +1,126 @@
+/*
+ * cs4272.c
+ *
+ *  Created on: Aug 16, 2026
+ *      Author: ozpv
+ */
+
+#include "i2c.h"
+#include "cs4272.h"
+
+volatile int32_t rx_buffer[BUFFER_SIZE] __attribute__((section(".audio_buffers")));
+volatile int32_t tx_buffer[BUFFER_SIZE] __attribute__((section(".audio_buffers")));
+
+const uint8_t CS4272_CONFIG[7] = {
+        // MODE CONTROL 1
+        // single speed i2s slave
+        0b00000001,
+        // DAC CONTROL
+        // no auto mute steep roll off interpolation 48 kHz de-emphasis
+        // Soft Ramp Up and Down and no polarity flipping
+        0b00001100,
+        // DAC Volume & Mixing Control
+        // Channel B Volume = Channel A Volume Soft Ramp and Zero Cross
+        // a = L b = R
+        0b01111001,
+        // Channel A volume
+        // 0 dB
+        // Binary Code Decimal Value Volume Setting
+        // 0000000 0 0 dB
+        // 0010100 20 -20 dB
+        // 0101000 40 -40 dB
+        // 0111100 60 -60 dB
+        // 1011010 90 -90 dB
+        0b00000000,
+        // Channel B volume
+        0b00000000,
+        // ADC control
+        // I2S up to 24-bit data High Pass filter on
+        // bits 3:2 adc channel mute
+        0b00010000,
+        // MODE CONTROL 2
+        // power down OFF
+        0b00000010,
+};
+
+HAL_StatusTypeDef CS4272_ReadRegister(uint8_t addr, uint8_t *data) {
+    return HAL_I2C_Mem_Read(&hi2c4, CS4272_I2C_ADDR, addr, I2C_MEMADD_SIZE_8BIT,
+            data, 1, HAL_MAX_DELAY);
+}
+
+HAL_StatusTypeDef CS4272_WriteRegister(uint8_t addr, uint8_t data) {
+    return HAL_I2C_Mem_Write(&hi2c4, CS4272_I2C_ADDR, addr,
+    I2C_MEMADD_SIZE_8BIT, &data, 1, HAL_MAX_DELAY);
+}
+
+void CS4272_Reset() {
+    HAL_GPIO_WritePin(GPIOB, GPIO_PIN_7, GPIO_PIN_RESET);
+
+    HAL_Delay(10);
+
+    HAL_GPIO_WritePin(GPIOB, GPIO_PIN_7, GPIO_PIN_SET);
+
+    HAL_Delay(10);
+}
+
+uint8_t CS4272_Init() {
+    CS4272_Reset();
+
+    if (HAL_I2C_IsDeviceReady(&hi2c4, CS4272_I2C_ADDR, 3, 1000) != HAL_OK) {
+        return HAL_ERROR;
+    }
+
+    // 5.2.1 Recommended Power-Up Sequence
+    // power down mode and control port enable
+    if (CS4272_WriteRegister(MODE_CONTROL_2, 0x03) != HAL_OK) {
+        return HAL_ERROR;
+    }
+
+    // check if device ID is correct
+    uint8_t id = 0;
+    if (CS4272_ReadRegister(CHIP_ID, &id) != HAL_OK) {
+        return HAL_ERROR;
+    }
+
+    if ((id >> 4) != CS4272_CHIP_ID) {
+        return 2;
+    }
+
+    // Configure
+    uint8_t cfg = 0;
+    for (uint8_t i = MODE_CONTROL_1; i < MODE_CONTROL_2; ++i) {
+        if (CS4272_WriteRegister(i, CS4272_CONFIG[i - 1]) != HAL_OK) {
+            return HAL_ERROR;
+        }
+
+        if (CS4272_ReadRegister(i, &cfg) != HAL_OK) {
+            return HAL_ERROR;
+        }
+
+        if (cfg != CS4272_CONFIG[i - 1]) {
+            return 2;
+        }
+    }
+
+    if (CS4272_WriteRegister(MODE_CONTROL_2, 0x02) != HAL_OK) {
+        return HAL_ERROR;
+    }
+
+    if (CS4272_ReadRegister(MODE_CONTROL_2, &cfg) != HAL_OK || cfg != 0x02) {
+        return 2;
+    }
+
+    return HAL_OK;
+}
+
+void HAL_SAI_RxHalfCpltCallback(SAI_HandleTypeDef *hsai) {
+    for(int i = 0; i < BUFFER_SIZE / 2; i++) {
+        tx_buffer[i] = rx_buffer[i];
+    }
+}
+
+void HAL_SAI_RxCpltCallback(SAI_HandleTypeDef *hsai) {
+    for(int i = BUFFER_SIZE / 2; i < BUFFER_SIZE; i++) {
+        tx_buffer[i] = rx_buffer[i];
+    }
+}