1 files changed, 64 insertions, 0 deletions
diff --git a/Core/Src/w9825g6kh6.c b/Core/Src/w9825g6kh6.c
new file mode 100755
index 0000000..56c5fde
--- /dev/null
+++ b/Core/Src/w9825g6kh6.c
@@ -0,0 +1,64 @@
+/*
+ * w9825g6kh6.c
+ *
+ *  Created on: Aug 18, 2026
+ *      Author: ozpv
+ */
+
+#include "fmc.h"
+#include "w9825g6kh6.h"
+
+void FMC_Init(void) {
+    /* USER CODE BEGIN FMC_Init 2 */
+
+    FMC_SDRAM_CommandTypeDef Command;
+
+    /* Step 1 and Step 2 already done in HAL_SDRAM_Init() */
+
+    /* Step 3: Configure a clock configuration enable command */
+    Command.CommandMode = FMC_SDRAM_CMD_CLK_ENABLE; /* Set MODE bits to "001" */
+    Command.CommandTarget = FMC_SDRAM_CMD_TARGET_BANK1; /* configure the Target Bank bits */
+    Command.AutoRefreshNumber = 1;
+    Command.ModeRegisterDefinition = 0;
+    HAL_SDRAM_SendCommand(&hsdram1, &Command, 0xfff);
+
+    /* Step 4: Insert 100 us minimum delay - Min HAL Delay is 1ms */
+    HAL_Delay(1);
+
+    /* Step 5: Configure a PALL (precharge all) command */
+    Command.CommandMode = FMC_SDRAM_CMD_PALL; /* Set MODE bits to "010" */
+    HAL_SDRAM_SendCommand(&hsdram1, &Command, 0xfff);
+
+    /* Step 6: Configure an Auto Refresh command */
+    Command.CommandMode = FMC_SDRAM_CMD_AUTOREFRESH_MODE; /* Set MODE bits to "011" */
+    Command.AutoRefreshNumber = 2;
+    HAL_SDRAM_SendCommand(&hsdram1, &Command, 0xfff);
+
+    /* Step 7: Program the external memory mode register */
+    Command.CommandMode = FMC_SDRAM_CMD_LOAD_MODE;/*set the MODE bits to "100" */
+    Command.ModeRegisterDefinition = (uint32_t)0 | 0<<3 | 2<<4 | 0<<7 | 1<<9;
+    HAL_SDRAM_SendCommand(&hsdram1, &Command, 0xfff);
+
+    /* Step 8: Set the refresh rate counter - refer to section SDRAM refresh timer register in RM0455 */
+    /* Set the device refresh rate
+    * COUNT = [(SDRAM self refresh time / number of row) x SDRAM CLK] – 20
+    = [(64ms/8192) * 100MHz] - 20 = floor(1562.5 - 20) = 761 */
+    HAL_SDRAM_ProgramRefreshRate(&hsdram1, 761);
+
+    /* USER CODE END FMC_Init 2 */
+}
+
+/* a test using address dependent values */
+void SDRAM_Test(void) {
+    volatile uint32_t *sdram = (volatile uint32_t *)SDRAM_BASE;
+
+    for (uint32_t i = 0; i < SDRAM_SIZE / sizeof(uint32_t); ++i) {
+        sdram[i] = i ^ 0xDEADDEAD;
+    }
+
+    for (uint32_t i = 0; i < SDRAM_SIZE / sizeof(uint32_t); ++i) {
+        if (sdram[i] != (i ^ 0xDEADDEAD)) {
+            Error_Handler();
+        }
+    }
+}